Nationwide · England, Scotland & Wales
Retaining Wall Specialists across the UK
Retaining walls designed and built to hold back soil safely.
In short
Retaining Wall Specialists design and build walls that hold back soil where ground levels change, such as terraced gardens, sloping drives and cut-back banks. The work covers assessing loads and ground conditions, excavation, reinforced concrete foundations, the wall itself in block, brick, stone, concrete or gabions, and drainage behind it so water pressure does not push the wall over.
- Free, no-obligation quotes
- Vetted, insured specialists
- Clear fixed prices
Fixed, clear prices
One all-in price before any work starts.
Vetted specialists
Insured teams who do this work every week.
Responsible disposal
Licensed waste routes and proper paperwork.
500 areas covered
Pages for every town we serve.
A retaining wall is not a garden wall that happens to have soil behind it. A one-metre bank of wet clay can push with a force of several tonnes along every few metres of wall, and most failures come from walls built without proper foundations, reinforcement or drainage. We arrange retaining wall work through a network of vetted, insured local builders and groundworkers who understand the loads involved.
Low walls under about a metre can often be built to standard details. Taller walls, walls holding up a drive or a neighbour's garden, and walls near buildings need a structural engineer's design. Tell us about your slope, the height you need to retain and what sits above it, and we will match you with a local specialist who can survey, design where needed and build to one clear price.
Our Retaining Wall Specialists services
Block and Render Retaining Walls
Reinforced hollow concrete block walls on concrete footings, filled with concrete and finished with render, cladding or stone facing.
Find out more →Brick and Natural Stone Retaining Walls
Traditional retaining walls in engineering brick, facing brick or natural stone, built to suit period properties and planted gardens.
Find out more →Reinforced Concrete Retaining Walls
Cast-in-place reinforced concrete walls for taller retaining, drives, basements and sites with heavy loads, built to an engineer's design.
Find out more →Gabion Retaining Walls
Galvanised steel mesh baskets filled with stone, stacked to form free-draining retaining walls that suit gardens, banks and rural sites.
Find out more →Retaining Wall Repair and Rebuilds
Assessing and repairing leaning, cracked or bulging retaining walls, from repointing and drainage fixes to taking down and rebuilding properly.
Find out more →Garden Terracing and Levelling
Turning sloping gardens into usable level terraces with a series of lower retaining walls, steps, drainage and soil management.
Find out more →How it works
Describe the slope
Use the quote form to tell us the length of wall, how much height needs retaining, the soil type if known and what sits above, such as a drive, building or neighbour's garden. Photos of the slope help a lot.
Site survey
A local specialist measures levels, checks ground conditions, drainage, nearby trees and buildings, and access for machinery. They will advise whether a structural engineer's design is needed for your wall.
Design and fixed quote
You receive a clear price covering excavation, foundations, reinforcement, the wall, drainage, backfill and waste removal. For taller or loaded walls, the price includes or follows the engineer's design.
Build
The site is excavated, foundations cast and the wall built in stages, with drainage and backfill placed as it rises. Concrete is given time to cure before full loading. Inspections are arranged where required.
Finish and handover
Copings, render or facing are completed, the ground behind is backfilled and tidied, and waste removed. The specialist explains how to keep weep holes and drains clear.
Retaining Wall Specialists prices
Retaining walls are priced by length and height, but what you are retaining matters as much as the size. A low wall holding a flower bed is far simpler than a tall wall supporting a driveway. Excavation, foundations and drainage make up much of the cost. The guide prices below are typical for UK retaining walls in 2026, excluding engineer's fees unless stated.
| Job | Guide price | Notes |
|---|---|---|
| Block retaining wall up to 1m high, rendered | £350–£600 per metre | Per linear metre, including reinforced footing, filled blocks, drainage, waterproofing and render. |
| Brick-faced retaining wall up to 1m high | £450–£750 per metre | Per linear metre with block core, facing brick, coping, drainage and footing. |
| Natural stone retaining wall | £500–£900 per metre | Per linear metre for walls around 1m high; price depends heavily on stone type. |
| Gabion retaining wall | £250–£450 per m² | Per square metre of wall face, including baskets, stone fill, base and geotextile. |
| Reinforced concrete retaining wall | from £900 per metre | Per linear metre for engineered walls over 1.5m, varying with design and access. |
| Structural engineer's design | £600–£1,800 | Design and calculations for taller walls or walls supporting drives, buildings or neighbouring land. |
Who we work for
Homeowners with sloping gardens
People who want to turn a steep, unusable garden into level terraces for lawn, patio or play, or replace a failing old wall before it collapses.
Homeowners creating driveways
Owners cutting into a front bank to create off-road parking, where the retaining wall must safely support the ground and often the pavement above.
Self-builders and developers
Builders working on sloping plots who need engineered retaining walls for drives, gardens and building platforms, coordinated with the main build programme.
Landlords and managing agents
Owners responsible for shared gardens and car parks where an old retaining wall is cracking or leaning and needs assessing and repairing safely.
Farms and rural landowners
Landowners stabilising banks, yards and tracks, often with gabion or concrete walls that cope with heavy machinery and surface water.
Rules and standards that apply
- The Party Wall etc. Act 1996 can apply in England and Wales when you build on a boundary or excavate within 3 metres of a neighbour's building and below its foundations, so notice may need to be served.
- Building Regulations approval may be needed where a retaining wall supports a building or forms part of building work, and walls holding significant loads should be designed by a structural engineer.
- Geotechnical design of retaining structures in the UK is carried out to Eurocode 7 (BS EN 1997), which engineers use to assess soil pressures and stability.
- In England, permitted development generally allows walls up to 1 metre high next to a road used by vehicles and 2 metres elsewhere, measured from ground level, so tall walls or those in conservation areas may need planning permission.
- Soil and spoil removed from site is controlled waste and must be carried by a registered waste carrier.
How to choose the right retaining wall specialists company
- Ask how they will design the wall and at what height they bring in a structural engineer.
- Check the quote includes drainage behind the wall, a land drain and weep holes, not just the visible wall.
- Ask what foundation size and reinforcement they plan to use, and why.
- Confirm they will handle Party Wall matters or tell you when notice is needed.
- Make sure they hold public liability insurance suitable for excavation work near buildings.
- Ask to see photos of similar retaining walls they have built, ideally some years old.
Frequently asked questions
How much does a retaining wall cost in the UK?
Low block retaining walls up to a metre high typically cost £350 to £600 per linear metre, including footings and drainage. Brick and stone walls cost more, often £450 to £900 per metre. Taller engineered concrete walls start from around £900 per metre plus design fees.
Do I need planning permission for a retaining wall?
Often not for low walls. In England, walls up to 1 metre next to a road used by vehicles and 2 metres elsewhere are usually permitted development. Taller walls, listed buildings and conservation areas may need permission. Retaining walls that alter ground levels significantly can also need consent.
When do I need a structural engineer for a retaining wall?
As a rule of thumb, get an engineer's design for walls retaining more than about a metre, walls supporting a drive, parking or a building, walls near a boundary with a neighbour's land above, and any wall on poor or wet ground. The design fee is small compared with the cost of failure.
Why do retaining walls fail?
Most fail because of water pressure behind them, inadequate foundations, missing reinforcement or extra load on top that was never designed for. Blocked or missing drainage is the most common cause. Tree roots and frost damage also play a part, especially on older walls.
What is the best material for a retaining wall?
For strength and value, reinforced hollow concrete blocks filled with concrete are hard to beat, and can be faced in render, brick or stone. Reinforced cast concrete suits taller walls. Gabions are good for free drainage. Sleepers work for low garden walls.
How deep should retaining wall foundations be?
It depends on height, soil and load. Low garden walls often sit on footings around 450mm to 600mm deep below finished ground. Taller or loaded walls need engineered footings, often wider on the retained side. Clay soils near trees may need deeper foundations.
Do retaining walls need drainage?
Yes. Without drainage, water builds up behind the wall and adds a large extra load. Good practice is clean stone backfill behind the wall, a perforated land drain at the base leading away, and weep holes through the face. A membrane protects the back of masonry walls.
Who is responsible for a retaining wall between neighbours?
Usually the owner of the higher land is responsible if the wall holds up their soil, but ownership depends on the title deeds and history of the site. Check your deeds and Land Registry plans. If unclear, take legal advice before major work.
Retaining Wall Specialists guides
Retaining Wall Cost UK: 2026 Prices per Metre by Material
In the UK in 2026, a rendered block retaining wall up to 1m high typically costs £350–£600 per linear metre, a brick-faced wall £450–£750…
Read the guide →Retaining Walls and the Rules: Planning, Building Regs and Party Walls
In England, walls up to 1 metre high next to a road used by vehicles and 2 metres elsewhere are generally permitted development, so taller…
Read the guide →Signs of a Failing Retaining Wall and What to Do
Signs of a failing retaining wall include leaning or tilting, bulging in the middle, stepped or widening cracks, water seeping through the…
Read the guide →Retaining Wall Materials Compared: Block, Brick, Stone, Concrete or Gabion
Rendered reinforced block is the most common cost-effective choice for garden retaining walls, at £350–£600 per metre up to 1m. Brick…
Read the guide →Retaining Wall Drainage: Why It Matters and How It Is Done
Retaining walls need drainage to stop water building up behind them, because saturated soil and trapped water greatly increase the pressure…
Read the guide →Areas we cover
We cover England, Scotland and Wales, with dedicated pages for 500 towns and cities. If your town isn't listed, ask anyway — we probably cover it.
Get a free retaining wall specialists quote
Tell us what you need and we'll come back with a clear price.
Request a quote