Retaining Wall Specialists
Block and Render Retaining Walls
Reinforced hollow concrete block walls on concrete footings, filled with concrete and finished with render, cladding or stone facing.

What's involved
Hollow concrete blocks laid over steel starter bars and filled with concrete are one of the most common ways to build a strong retaining wall. The specialist digs a trench for a reinforced concrete strip footing, usually wider on the retained side to resist overturning, and casts steel bars upright into it. Blocks are laid over the bars and their cores filled with concrete as the wall rises. A waterproof coating or membrane goes on the back face, then a perforated land drain is laid at the base, surrounded by clean stone, with drainage aggregate behind the wall to the top. Weep holes let water escape through the face. The front can be rendered, clad with stone or faced in brick. A typical 10 metre wall around a metre high takes one to two weeks.
How we handle it
Describe the slope
Use the quote form to tell us the length of wall, how much height needs retaining, the soil type if known and what sits above, such as a drive, building or neighbour's garden. Photos of the slope help a lot.
Site survey
A local specialist measures levels, checks ground conditions, drainage, nearby trees and buildings, and access for machinery. They will advise whether a structural engineer's design is needed for your wall.
Design and fixed quote
You receive a clear price covering excavation, foundations, reinforcement, the wall, drainage, backfill and waste removal. For taller or loaded walls, the price includes or follows the engineer's design.
Build
The site is excavated, foundations cast and the wall built in stages, with drainage and backfill placed as it rises. Concrete is given time to cure before full loading. Inspections are arranged where required.
Finish and handover
Copings, render or facing are completed, the ground behind is backfilled and tidied, and waste removed. The specialist explains how to keep weep holes and drains clear.
Price guide
Retaining walls are priced by length and height, but what you are retaining matters as much as the size. A low wall holding a flower bed is far simpler than a tall wall supporting a driveway. Excavation, foundations and drainage make up much of the cost. The guide prices below are typical for UK retaining walls in 2026, excluding engineer's fees unless stated.
- Brick-faced retaining wall up to 1m high: £450–£750 per metre. Per linear metre with block core, facing brick, coping, drainage and footing.
- Natural stone retaining wall: £500–£900 per metre. Per linear metre for walls around 1m high; price depends heavily on stone type.
- Gabion retaining wall: £250–£450 per m². Per square metre of wall face, including baskets, stone fill, base and geotextile.
Questions about block and render retaining walls
How much does a retaining wall cost in the UK?
Low block retaining walls up to a metre high typically cost £350 to £600 per linear metre, including footings and drainage. Brick and stone walls cost more, often £450 to £900 per metre. Taller engineered concrete walls start from around £900 per metre plus design fees.
Do I need planning permission for a retaining wall?
Often not for low walls. In England, walls up to 1 metre next to a road used by vehicles and 2 metres elsewhere are usually permitted development. Taller walls, listed buildings and conservation areas may need permission. Retaining walls that alter ground levels significantly can also need consent.
When do I need a structural engineer for a retaining wall?
As a rule of thumb, get an engineer's design for walls retaining more than about a metre, walls supporting a drive, parking or a building, walls near a boundary with a neighbour's land above, and any wall on poor or wet ground. The design fee is small compared with the cost of failure.
Other services
Brick and Natural Stone Retaining Walls
Traditional retaining walls in engineering brick, facing brick or natural stone, built to suit period properties and planted gardens.
Reinforced Concrete Retaining Walls
Cast-in-place reinforced concrete walls for taller retaining, drives, basements and sites with heavy loads, built to an engineer's design.
Gabion Retaining Walls
Galvanised steel mesh baskets filled with stone, stacked to form free-draining retaining walls that suit gardens, banks and rural sites.
Retaining Wall Repair and Rebuilds
Assessing and repairing leaning, cracked or bulging retaining walls, from repointing and drainage fixes to taking down and rebuilding properly.
Garden Terracing and Levelling
Turning sloping gardens into usable level terraces with a series of lower retaining walls, steps, drainage and soil management.
Block and Render Retaining Walls near you
Get a free retaining wall specialists quote
Tell us what you need and we'll come back with a clear price.
Request a quote